It is 8x faster than the standard USB port. To setup the DisplayLink driver to use AirPlay: Dell Display Manager For Macos DownloadConnect this docking station via a Thunderbolt 3 interface and gain access to the fastest data transfer available today. Note that HDMI, DVI and VGA displays are not supported.For macOS 10.14 onwards, v5.x or later software should be used, which restores multiple extended display support, without needing to use AirPlay. Supports popular display modes such as 3840x2160 60Hz (4K) and 1920x1080 (1080p) DISPLAYPORT ONLYAdapter video output ports are DisplayPort only. TWO 4K DISPLAYSAdd two DisplayPort displays up to 4K 60Hz to your Thunderbolt 3 Apple Mac at full native GPU performance.
Displayport For Osx Install The LatestOne Thunderbolt port (up to 10 Gbps), one FireWire 800 port (up to 800 Mbps), two USB 2.0 ports (up to 480 Mbps), SDXC card slot.Do you enjoy detailed graphics with high resolution? If so, then this station can allow you to connect to one LCD monitor with up to 8K resolution! And of course, you can enjoy truly smooth video thanks to high refresh rate of 60 Hz.Download and install the latest AMD graphics drivers. 13.3-inch (diagonal) LED-backlit glossy widescreen display, 1280-by-800 resolution. With DSC’s bandwidth reduction, the DisplayPort 1.4 standard can be used to transport Ultra High Definition (UHD), 5K (UHD+), 8K (FUHD) with High Dynamic Range.Dual 4K HDMI/Dual 4K DisplayPort/4K HDMI + 4K DisplayPort output.Printer? Keyboard? Mouse? External hard drive or flash drive? Charging cable for your phone? You can connect all your devices to the docking station quickly and easily. Expand USB 3.0 connectivity. Click Submit to view the list of available drivers.Support for up to 4 additional USB Displays (Mac OS X). Select your product from the list, not the menu: First select Graphics, then select Mac Graphics in the next column, then select Apple Boot Camp in the next column.![]() 2 monitors – 1x DP + 1x DP – 2x to 1920 x 1080/60Hz 2 monitors – 1x DP + 1x DP- up to 2x 4K/60Hz Thunderbolt™ 3 with DisplayPort 1.2 support Ntfs for mac from paragon1x input for power supply (DC 20 V/6.75 A) 1x 3.5 mm combined audio and microphone input 1x USB 3.1 Gen 2 port (10 Gbps) with quick charging support (BC 1.2) 2x USB-C Gen 2 port (10 Gbps, for data only) Windows 10, macOS X (Sierra and higher) with latest updatesThe latest, second-generation Thunderbolt 3 technology, has arrived. In order to use HDR and G-Sync/Freesync, these technologies must be supported by the monitor and the graphics card To use refresh rates of 60 Hz and higher, a monitor that supports these refresh rates is required Device with a free Thunderbolt 3 or USB-C port with DisplayPort Alternate Mode support. Device with a free Thunderbolt 3 or USB-C port with Power Delivery support. Device with a free Thunderbolt 3 or USB-C portRequirements for Power Delivery function: Connect dual 4K/60Hz external displays, or a single 8K/30Hz*. An ideal solution for professional graphic designers, data analysts, engineers, film editors or enthusiasts.Second generation Thunderbolt 3 technology means the docking station is compatible with Thunderbolt 3 and USB-C, making it a flexible and versatile option for companies with a mixed estate of Thunderbolt 3 and USB-C notebooks or tablets. You can also connect your headphones or speaker and charge your notebook (85W) while working , all via a single port.Thanks to the integrated DP 1.4 protocol, you can connect this docking station to a monitor with up to 8K (7680 x 4320)* with a 30 Hz refresh rate, which is comparable to four 4K monitors side by side. This is one of the most powerful docking stations available in the market today.Enjoy unrivalled image quality, fast internet, and the ability to transfer data at a rate of over 1 GB per second, even when using multiple USB ports simultaneously. ![]() Can I set up which monitor will play the sound?Answer: Unfortunately, it is not possible to select a monitor to play the sound. When these monitors are connected to a docking station, both of them play the same sound. Supplied with 135W (20V, 6,75A) professional quality power supply and 70 cm Thunderbolt 3 cable.* 8K resolution must be supported by the host notebook or tablet.Question: I have 2 external monitors with built-in speakers. Right-click the Start button and select Power options. This setting needs to be changed. Windows has a special setting which controls what the laptop should do in case of closing the lid. Is it possible to prevent it? ![]() G-sync, or FreeSync.Answer: The docking station cannot use the graphics technologies from nVidia/AMD/Intel.Question: Is it possible to set the frame rate to 120 Hz (144 Hz etc.) with the docking station / video adapter?Answer: This is not possible. In case you don’t know where to find it please refer to the manual for your monitor.Question: Can the monitor connected via the docking station use the graphics technology from nVidia/AMD/Intel? E.g. Also, be sure that in the settings of your monitor is selected the setting DP 1.2. This is supported only by the DP cables version 1.2 and later. In case of connecting via DisplayPort your cable supports 4K 60Hz. Longer cables may not work properly.Also, for USB-C and Thunderbolt 3 cables, you need to make sure they support DisplayPort Alt Mode (UBS-C only) and Power Delivery (USB-C and Thunderbolt 3) profiles. Here you can see maximum cable lengths according to USB/Thunderbolt 3 specifications. Please see the table below. Can I use a longer third-party cable?Answer: Yes, it is possible. Question: I have a laptop with a Thunderbolt 3 or USB-C port, but the laptop does not charge anyway.Answer: According to the Thunderbolt 3/USB-C specifications, the laptop powering is only optional. The i-tec Docker Pro is free and you can download it from our website. But when I plug this cable into the LAN connector in the laptop, everything works properly.Answer: In some cases, the businesses limit the LAN/local network connection only to the network elements with a known MAC address (each LAN connector has its own MAC address).This can be bypassed either by manually changing the MAC address of the LAN connector in the docking station, or by using our i-tec Docker Pro software (for Windows) which clones the MAC address from your laptop to the docking station. Here select System and from the menu on the left select Sound and change here the Output device.Question: I use a docking station in the office/business, and if I plug the Ethernet cable into the docking station, I can’t connect to the internet/local area network.
0 Comments
Leave a Reply. |
AuthorAnn ArchivesCategories |